![]() Here`s another interesting note from the manual that I`m sure alot of guys overlook, this is on page 54:įirmly tighten the cylinder base screws of professional saws(3.4kW or more) after 10 to 20 hours of operation. There is further discussion on page 28 of the manual regarding fuel quality, specifically regarding additives, based on what`s said I`d have to posit that they are speaking of ethanol content and it`s negative impact on engine and carb life and performance. This, in turn, increases the risk of piston seizure and damage to the engine. Note that there is no caveat suggesting that you use lower octane fuel, the manual goes on to say.įuel with a lower octane rating may increase engine temperatures. If the octane rating of the mid-grade gasoline in your area is lower, use premium unleaded fuel. Use mid-grade gasoline with a minimum octane rating of 89(R+M/2). Here is an excerpt taken from the MS 361 manual on page 28: All I use in my saws is premium, to prevent detonation, the additives are detrimental? Never seen it, and if you read the owners manual it sets a minimum octane standard for your saw which is above Regular unleaded levels. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |